Min. Shipping : £0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Metal Lucas type headlamp bowl for standard 7" (700) light units. Three adjuster type. Supplied with metal back shell, chrome retaining rim holder and adjusters.
Plastic nest for 5 3/4" light units - includes nest to body gasket. Suitable for light units LA1014, LA1015, LA1016 and LA1017
Plastic nest for 7" lenses, includes nest to body gasket. This is a direct replacement for the Lucas type metal nest.
Metal Lucas type headlamp nest for standard 7" (700) light units. Two adjuster type. Supplied with metal back shell, chrome retaining rim holder and adjusters. Includes nest to body gasket.
Open backed plastic nest - used for pop up headlights or where rear space is limited. Includes nest to body gasket.
headlamp bowl to body rubber gasket for all two screw adjuster 7" (700 type) lamps.
700 series headlamp glass to rim rubber dust gasket.
Lucas type silver painted brass bracket. fits inside headlamp rim, tongue fits through rim slot which then accepts rim fixing screw, dimensions 38mm x 15mm, screw tongue 15mm wide x 9mm tall.
Lucas type silver painted brass bracket. fits inside headlamp rim, tongue fits through rim slot which then accepts rim fixing screw in threaded hole, dimensions 24mm x 13mm, threaded screw...
Lucas type silver painted brass bracket. fits inside headlamp rim, tongue fits through rim slot which then accepts rim fixing screw in plain 5mm hole, dimensions 28mm x 13mm, threaded screw...
Silver painted brass bracket. fits inside headlamp rim, tongue fits through rim slot which then accepts rim fixing screw, dimensions 36mm x 18mm, screw tongue 17mm wide x 15mm tall with 5mm slot.
Silver painted brass bracket. fits inside headlamp rim, tongue fits through rim slot which then accepts rim fixing screw, dimensions 36mm x 13mm, screw tongue 17mm wide x 13mm tall with 5mm slot.
Headlamp mounting bolt (hollow). thread 5/8" x 26 tpi ( fine thread) as original. measures approx 56mm long x 16mm thread diameter.
Headlamp mounting bolt (hollow) with loose collar. thread 5/8" x 26 tpi ( fine thread) as original. measures approx 50mm long x 16mm thread diameter.
Headlamp mounting bolt (hollow). thread 5/8" x 26 tpi ( fine thread). Measures approx 68mm long x 16mm thread diameter.
Headlamp mounting bolt (hollow). thread 5/8" x 26 tpi ( fine thread) as original. measures approx 50mm long x 16mm thread diameter.
P100 headlamp mounting bolt and nut. Thread 1/2" x 26 tpi ( fine thread) as original. Measures approx 105mm long x 13mm thread diameter (thread runs for 28mm), head diameter 22mm with a 12.5mm...
Lamp mounting bolt (hollow). thread 7/16" x 26 tpi ( fine thread) as original. measures approx 36mm long x 11mm thread diameter. supplied with hexagon nut. used on various Lucas spot and sidelamps.
Hexagonal brass nut for headlamp, 5/8" x 26 tpi (fine thread). Approx 16mm bore. 10mm deep. 13/16" AF
Hexagonal nut for Lucas type lamps. 7/16" x 26 tpi (very fine thread) approx 11mm bore.
Brass headlamp stud mounting nut for Lucas RB160, P100, P80 etc type lamp. thread 1/2" x 26 tpi
as Lucas part 500357
Daisy head headlamp rim screw for the Lucas L140 & L150 headlamps, overall length 36mm (head 18mm, thread 18mm) head diameter 15mm tapering down to 9mm, with a 2BA thread.
W wire clip to hold glass into headlamp rim, approx 36mm long
Large W wire spring clip for holding glass into rim. approx 48mm long side with a slight curve. useful for deep headlamp rims.
Large W wire for holding glass into rim, approx 54mm long side. this clip is actually made for P100 lamps.
Small w wire clip for sidelamps, approx 22mm long, packet of 6 pieces
Chromium rim catch for Lucas head lamps, long type, overall dimensions 45mm long x 26mm wide. as Lucas part 532590
Chromium plated rim catch, for Lucas head lamps, short style, overall dimensions 31mm long x 27mm wide, as Lucas 509936. Use with wire spring clip - our part number 864.
Spring (spectacle shape only) for rim using short rim catch clip, as Lucas part 509191
Stainless steel headlamp rim retaining screw
Used in Butler type lamps - stainless steel.
screw stud and Butler type catch barrel.
Stem bolt washers and nut used in free standing lamps
Headlight peak for 7" lights. Stainless steel with clips behind inner headlight rim.
Stock may vary slightly.
Made in house and fitted to the head lamp units we assemble, BS specified wiring and wire colours. Approximate length 45cm
Wiring harness for H4 headlight fitted with side light bulb holder that accepts capless bulbs (B501) with extra earth wire/terminal for Caterham cars, supplied with plastic sheathing and wiring...
Wiring harness for H4 headlight fitted with side light wires with Lucar terminals fitted, supplied with plastic sheathing and wiring grommet, BS specified wiring and wire colours. Approximate...