Stafford Vehicle Components

Orderline: +44 (0) 1684 219863

£GBP
  • Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.

  • Vat is applicable to all UK orders.
    Vat is also applicable to EU orders unless supported by a Valid EEC Vat number entered in your Account details (or when checking out). THIS WILL BE CHECKED WHEN ORDERS ARE PROCESSED.

Bonnet Tape, Catches & Corners

Store
Product Image

407 - Bonnet fastener, twist to release - as Ripaults S.A.4

From £74.85 (£89.82 inc. VAT @ 20%)

Chrome finish on brass, tee shape twist handle fastener. Push top down against spring to engage hook, turn through 90 degree to release. Lever top 52mm long, angled base approx 45mm diameter with...

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

CA1379 - Battery clamp bracket

From £7.83 (£9.40 inc. VAT @ 20%)

Universal battery clamp bracket to keep the battery well secured. With a long angled bar that pulls against the side of the battery and screw thread adjuster rods for fitting the end to holes in...

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

116 - Bonnet catch with bonnet plate and stud - Morris, MG, Wolseley

From £73.03 (£87.64 inc. VAT @ 20%)

Chrome plated brass bonnet catch as fitted to Morris Minor, MG J2, Wolseley Hornet etc. The catch has a kidney shape plate to allow movement. Catch size 133mm overall.

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

138 - Bonnet catch - Wilmot Breeden pattern for Morris, Morgan etc.

From £38.32 (£45.98 inc. VAT @ 20%)

Pull down bonnet catch from a Wilmot Breeden pattern as used as original equipment for Morris 8, Morgan etc. Chrome on brass, approx 4.75" / 120mm long. Complete with bonnet catch plate. Hole...

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

148 - Bonnet catch - Matching base and catch plate

From £32.52 (£39.02 inc. VAT @ 20%)

Small top quality catch, approx 4.25" / 110mm long overall, complete with catch plate. Chromium plated on brass, small rubber buffer on back. Base plate and catch plate same size (40mm x 19mm with...

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

149 - Bonnet catch - Large pull catch

From £40.05 (£48.06 inc. VAT @ 20%)

Large, top quality catch. Approx. 135mm overall size complete with catch plate. Chromium or nickel plated on brass. Mountings approx 90mm apart

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

149-c - Bonnet catch - Large pull catch - Chrome

From £40.05 (£48.06 inc. VAT @ 20%)

Large, top quality catch. Approx. 135mm overall size complete with catch plate. Chromium or nickel plated on brass. Mountings approx 90mm apart

Chrome finish

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

149-n - Bonnet catch - Large pull catch - Nickel

From £40.05 (£48.06 inc. VAT @ 20%)

Large, top quality catch. Approx. 135mm overall size complete with catch plate. Chromium or nickel plated on brass. Mountings approx 90mm apart

Nickel finish

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

403 - Screw down lobe type bonnet catch

From £65.95 (£79.14 inc. VAT @ 20%)

Screw down bonnet catch which bolts to the outside of the bonnet panel, new manufacture, 4 mounting holes approx approx 28mm and 24mm apart vertically on 48mm round base, chromium top, approx 85mm...

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

403-CP - Screw down lobe type bonnet catch - 4 Lobe all chrome plain top

From £65.95 (£79.14 inc. VAT @ 20%)

Screw down bonnet catch which bolts to the outside of the bonnet panel, new manufacture, 4 mounting holes approx approx 28mm and 24mm apart vertically on 48mm round base, chromium top, approx 85mm...

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

403-CT - Screw down lobe type bonnet catch - 5 Lobe Tenax pattern all chrome

From £73.95 (£88.74 inc. VAT @ 20%)

Screw down bonnet catch which bolts to the outside of the bonnet panel, new manufacture, 4 mounting holes approx approx 28mm and 24mm apart vertically on 48mm round base, chromium top, approx 85mm...

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

403-CR - Screw down lobe type bonnet catch - 4 Lobe Ripaults marked all chrome

From £80.20 (£96.24 inc. VAT @ 20%)

Screw down bonnet catch which bolts to the outside of the bonnet panel, new manufacture, 4 mounting holes approx approx 28mm and 24mm apart vertically on 48mm round base, chromium top, approx 85mm...

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

426 - Bonnet catch - As Ripaults model P.U.I

From £29.98 (£35.98 inc. VAT @ 20%)

High quality spring loaded pull catch with loop finger pull ring, powder coated finish, complete with pocket. Approximately 118mm long. Chrome finger pull ring. Hook for pocket approximately 80mm...

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

A-16750 - Bonnet catch - Polished Stainless steel

From £30.68 (£36.82 inc. VAT @ 20%)

Bonnet/hood catch supplied with pocket. Polished stainless steel parts, 91mm tall overall, base 55mm wide. Choice of 2 hole mount (13mm deep) or 3 hole mount (30mm deep).

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

A-16750-2 - Bonnet catch - Polished Stainless steel - Two hole mount bracket

From £32.21 (£38.65 inc. VAT @ 20%)

Bonnet/hood catch supplied with pocket. Polished stainless steel parts, 91mm tall overall, base 55mm wide. Choice of 2 hole mount (13mm deep) or 3 hole mount (30mm deep).

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

A-16750-3 - Bonnet catch - Polished Stainless steel - Three hole mount bracket

From £30.68 (£36.82 inc. VAT @ 20%)

Bonnet/hood catch supplied with pocket. Polished stainless steel parts, 91mm tall overall, base 55mm wide. Choice of 2 hole mount (13mm deep) or 3 hole mount (30mm deep).

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

CA236A - Bonnet catch - T top pattern

From £30.01 (£36.01 inc. VAT @ 20%)

Stainless steel bonnet catch with T top/bar grip pattern. 95mm long, two screw base (mount holes 35mm centres) mounts horizontally.

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

468 - Bonnet catch

From £12.95 (£15.54 inc. VAT @ 20%)

Open spring bonnet catch, nickel plate finish, 125mm long, a good value spring catch to hold a bonnet down, supplied with top catch.

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

839A - Rubber bonnet catch/fastener - Small

From £3.91 (£4.69 inc. VAT @ 20%)

Small rubber hook with zinc plated bracket and clip. Overall length approx 54mm. Maximum extension from relaxed to tension not to exceed 10%.

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

839 - Rubber bonnet catch/fastener - Large

From £4.75 (£5.70 inc. VAT @ 20%)

Rubber hook with zinc plated bracket and clip. Overall length approx 122mm. Maximum extension from relaxed to tension not to exceed 10%.

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

BONREL1 - Bonnet release cable - Black

From £14.14 (£16.97 inc. VAT @ 20%)

Bonnet release cable with black plastic T shaped handle with 'Raised bonnet' symbol. Flanged (1/2" diameter) threaded (1/2" long) feed through with nut and shake proof washer. 75mm straight shaft,...

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

BONREL2 - Bonnet release cable - Red

From £20.39 (£24.47 inc. VAT @ 20%)

Bonnet release cable with red plastic T shaped handle. Flanged (20mmdiameter) threaded (16mm long) feed through with nut and shake proof washer. 75mm straight shaft, 1.5m red flexible outer (5mm...

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

270 - Bonnet tape flat type 3/8" (10mm)

From £6.75 (£8.10 inc. VAT @ 20%)

10mm wide x approx 3mm thick. This product is impregnated to produce a dark brown stiff beading (as original product) which will acts as the rubbing tape between bonnet (hood) and radiator cowl...

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

232 - Bonnet tape flat type 3/4" (19mm)

From £8.05 (£9.66 inc. VAT @ 20%)

19mm wide x approx 3mm thick. This product is impregnated to produce a dark brown stiff beading (as the original product) which will act as the rubbing tape between bonnet (hood), radiator cowl...

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

231 - Bonnet tape flat type 1/2" (13mm)

From £6.98 (£8.38 inc. VAT @ 20%)

13mm wide x approx 3mm thick. This product is impregnated to produce a dark brown stiff beading (as the original product) which will act as the rubbing tape between bonnet (hood), radiator cowl...

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

271 - Bonnet tape flat type 5/8" (16mm)

From £7.90 (£9.48 inc. VAT @ 20%)

16mm wide x approx 3mm thick. This product is impregnated to produce a dark brown stiff beading (as the original product), which acts as the rubbing tape between bonnet (hood) and radiator cowl...

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

248 - Bonnet tape flat type 1" (25mm)

From £8.96 (£10.75 inc. VAT @ 20%)

25mm wide x approx 3mm thick. this product is impregnated to produce a dark brown stiff beading (as original product) which will acts as the rubbing tape between bonnet (hood) and radiator cowl...

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

920 - Bonnet tape flat type 1-1/4" (32mm)

From £8.47 (£10.16 inc. VAT @ 20%)

32mm wide x approx 3mm thick. this product is impregnated to produce a dark brown stiff beading (as original product) which will acts as the rubbing tape between bonnet (hood) and radiator cowl...

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

880 - Bonnet tape beaded type 1/2" (13mm)

From £7.24 (£8.69 inc. VAT @ 20%)

13mm wide x approx 4.5mm thick. this product is impregnated to produce a dark brown stiff beading (as original product) which will acts as the rubbing tape between bonnet (hood) and radiator cowl...

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

246 - Bonnet tape beaded type 5/8" (16mm)

From £8.35 (£10.02 inc. VAT @ 20%)

16mm wide x approx 4.5mm thick. this product is impregnated to produce a dark brown stiff beading (as original product) which will acts as the rubbing tape between bonnet (hood) and radiator cowl...

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

230 - Bonnet tape beaded type 3/4" (19mm)

From £9.76 (£11.71 inc. VAT @ 20%)

19mm wide x approx 4.5mm thick. This product is impregnated to produce a dark brown stiff beading (as the original product) which will act as the rubbing tape between bonnet (hood), radiator cowl...

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

247 - Bonnet tape beaded type 1" (25mm)

From £11.84 (£14.21 inc. VAT @ 20%)

25mm wide x approx 4.5mm thick. this product is impregnated to produce a dark brown stiff beading (as original product) which will acts as the rubbing tape between bonnet (hood) and radiator cowl...

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

654 - Bifurcated copper split rivet

From £3.14 (£3.77 inc. VAT @ 20%)

Copper bifurcated rivet, 7.5mm head, stem 3.8mm x 11mm. for fixing bonnet tape etc. Per packet 10

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

260H - Rubber bonnet corner - Original Holdtite pattern, 45mm sides

From £3.99 (£4.79 inc. VAT @ 20%)

Right angle, original Holdtite design made from the original tooling, side approximately 45mm.

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

260P - Rubber bonnet corner - Plain, 45mm sides

From £2.99 (£3.59 inc. VAT @ 20%)

Right angle, plain pattern, sides approximately 45mm long

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

571 - Rubber bonnet corner - 60 degree, rounded end, 30mm sides

From £2.90 (£3.48 inc. VAT @ 20%)

Sides angled at 60°, rounded end, approximately 30mm long sides.

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

572 - Rubber bonnet corner - 50 degree, rounded end, 45mm sides

From £2.77 (£3.32 inc. VAT @ 20%)

Sides angled at 50°, approximately 45mm long sides, heavy corner.

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

573 - Rubber bonnet corner - Centre side rubber, 35mm wide

From £3.73 (£4.48 inc. VAT @ 20%)

Centre side rubber, approximately 35mm wide.

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners
Product Image

7W-16625 - Rubber bonnet corner - With metal bonded insert

From £6.22 (£7.46 inc. VAT @ 20%)

Black moulded part with metal interbonded plate

Stafford Vehicle Components - Tools, Hardware, Consumables & Accessories - Bonnet Tape, Catches & Corners