Stafford Vehicle Components

Orderline: +44 (0) 1684 219863

£GBP
  • Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.

  • Vat is applicable to all UK orders.
    Vat is also applicable to EU orders unless supported by a Valid EEC Vat number entered in your Account details (or when checking out). THIS WILL BE CHECKED WHEN ORDERS ARE PROCESSED.

Hose Tail Fittings for Fuel

Store
Product Image

CA826 - Flexible hose fittings

From £3.35 (£4.02 inc. VAT @ 20%)

Brass BSP threaded nut and push on hose connector fitting

Product Image

CA826A - Flexible hose fittings - 1/4" BSP female nut with barbed hose fitting for 1/4" ID pipe

From £3.35 (£4.02 inc. VAT @ 20%)

Brass BSP threaded nut and push on hose connector fitting

1/4"BSP nut for 1/4" push on pipe

Product Image

CA826B - Flexible hose fittings - 1/4" BSP female nut with barbed hose fitting for 5/16" ID pipe

From £3.35 (£4.02 inc. VAT @ 20%)

Brass BSP threaded nut and push on hose connector fitting

1/4"BSP nut for 5/16" pipe

Product Image

CA826C - Flexible hose fittings - 3/8" BSP female nut with barbed hose fitting for 3/8" ID pipe

From £3.72 (£4.46 inc. VAT @ 20%)

Brass BSP threaded nut and push on hose connector fitting

3/8"BSP nut for 3/8" push on pipe

Product Image

1/8NPTFM-1/4C-STR - 1/8NPTF Male Straight For 1/4" ID Hose

From £2.70 (£3.24 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive clamp or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Product Image

1/8NPTFM-1/4C-90 - 1/8" NTPF Male 90° For 1/4" ID Hose - Brass

From £6.98 (£8.38 inc. VAT @ 20%)

90 degree male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Product Image

1/4BSPT-1/4C-STR - 1/4BSPT Male Straight For 1/4"ID Hose

From £2.87 (£3.44 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Product Image

1/4NPTFM-1/4C-STR - 1/4NPTF Male Straight For 1/4"ID Hose

From £10.20 (£12.24 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Product Image

3/8BSPM-1/4C-STR - 3/8" BSP Male For 1/4" ID Hose

From £4.44 (£5.33 inc. VAT @ 20%)

Straight 3/8" BSP male to 1/4" hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low-pressure (up to 15psi) carburettor installations.

Product Image

1/8NPTFM-5/16C-STR - 1/8NPTF Male Straight For 5/16" ID Hose

From £2.46 (£2.95 inc. VAT @ 20%)

Straight 1/8" NPTF (tapered) male to 5/16" ID hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low-pressure (up to 15psi) carburettor...

Comparable to other manufacturer part numbers - FPA903A,

Product Image

1/8NPTFM-5/16C-90 - 1/8" NPTF Male 90° For 5/16" ID Hose - Brass

From £8.90 (£10.68 inc. VAT @ 20%)

90 degree male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive clamp or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Product Image

1/4NPTFM-5/16C-STR - 1/4NPTF Male Straight For 5/16" ID Hose

From £4.35 (£5.22 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Product Image

1/4BSPM-5/16C-STR - 1/4" BSP Male For 5/16" ID Hose

From £3.32 (£3.98 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Product Image

1/4NPTFM-5/16C-90 - 1/4" NPTF Male 90°For 5/16" ID Hose - Brass

From £8.95 (£10.74 inc. VAT @ 20%)

90 degree male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Product Image

3/8BSPM-5/16C-STR - 3/8BSP Male For 5/16" ID Hose

From £9.08 (£10.90 inc. VAT @ 20%)

Straight 3/8" BSP male to 5/16" ID hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low-pressure (up to 15psi) carburettor installations.

Product Image

1/2UNFM-5/16C-STR - 1/2UNF Male For 5/16" ID Hose

From £8.70 (£10.44 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Product Image

1/8NPTFM-3/8C-STR - 1/8NPTF Male Straight For 3/8" ID Hose

From £5.04 (£6.05 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Product Image

1/8NPTFM-3/8C-90 - 1/8" NPTF Male 90° For 3/8" ID Hose - Brass

From £5.90 (£7.08 inc. VAT @ 20%)

90 degree male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Product Image

1/4BSPM-3/8C-STR - 1/4" BSP Male Straight For 3/8" ID Hose

From £3.22 (£3.86 inc. VAT @ 20%)

Straight 1/4" male to 3/8" hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low-pressure (up to 15psi) carburettor installations.

Product Image

1/4BSPF-5/16C-STR - 1/4" BSP Female Straight For 5/16" ID Hose

From £3.92 (£4.70 inc. VAT @ 20%)

Straight female to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Product Image

1/4NPTFM-3/8C-STR - 1/4NPTF Male Straight For 3/8" ID Hose

From £6.36 (£7.63 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Product Image

1/4NPTFM-3/8C-90 - 1/4" NPTF Male 90° For 3/8" ID Hose - Brass

From £7.82 (£9.38 inc. VAT @ 20%)

90 degree male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Product Image

3/8BSPM-3/8C-STR - 3/8" BSP Male Straight For 3/8" ID Hose

From £8.44 (£10.13 inc. VAT @ 20%)

3/8" BSP Straight male to 3/8" ID hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low-pressure (up to 15psi) carburettor installations.

Product Image

3/8BSPF-3/8C-STR - 3/8" BSP Female Straight For 3/8" ID Hose

From £4.45 (£5.34 inc. VAT @ 20%)

Straight female to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Product Image

3/8BSPT-3/8C-STR - 3/8" BSPT Male Straight For 3/8" ID Hose

From £7.47 (£8.96 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Product Image

3/8NPTFM-3/8C-STR - 3/8NPTF Male Straight For 3/8" ID Hose

From £5.88 (£7.06 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Product Image

1/4BSPT-7/16C-STR - 1/4BSPT Male Straight For 7/16"ID Hose

From £2.97 (£3.56 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Product Image

1/4NPTFM-1/2C-STR - 1/4NPTF Male Straight For 1/2" ID Hose

From £6.00 (£7.20 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburetor installations.

Product Image

3/8BSPT-1/2C-STR - 3/8" BSPT Male Straight For 1/2" ID Hose

From £7.35 (£8.82 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Product Image

1/4NPTFM-9/16C-STR - 1/4NPTF Male Straight For 9/16" ID Hose

From £5.90 (£7.08 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburetor installations.

Product Image
Photograph for illustrative purposes only - not actual product shown

M10M-5/16C-STR - M10 x 1 Male for 5/16" ID Hose

From £9.44 (£11.33 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Product Image

M12M-1/4C-STR - M12 x 1.5 Male for 1/4" ID Hose

From £2.14 (£2.57 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Product Image

M12M-5/16C-STR - M12 x 1 Male for 5/16" ID Hose

From £10.15 (£12.18 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Product Image

M14M-5/16C-STR - M14 x 1.5 Male for 5/16" ID Hose

From £10.62 (£12.74 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Product Image
Photograph for illustrative purposes only - not actual product shown

M16M-3/8C-STR - M16 x 1.5 Male for 3/8" ID Hose

From £11.70 (£14.04 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Product Image

HJ1/4 - 1/4" ID Hose Joiner

From £1.98 (£2.38 inc. VAT @ 20%)

Steel Hose Joiner For 1/4" ID Hose. Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor installations.

Comparable to other manufacturer part numbers - HRC4/04,

Product Image

HJ5/16 - 5/16" ID Hose Joiner

From £2.53 (£3.04 inc. VAT @ 20%)

Steel Hose Joiner For 5/16" ID Hose. Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor installations.

Comparable to other manufacturer part numbers - HRC5/05,

Product Image

HJ3/8 - 3/8" ID Hose Joiner

From £3.25 (£3.90 inc. VAT @ 20%)

Steel Hose Joiner For 3/8" ID Hose. Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor installations.

Comparable to other manufacturer part numbers - HRC6/06,

Product Image

HJ1/4-5/16 - 1/4" To 5/16" ID Step Up Hose Joiner

From £3.15 (£3.78 inc. VAT @ 20%)

Steel Step Up Hose Joiner - from 1/4" To 5/16" ID Hose. Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor installations.

Product Image

HJ5/16-3/8 - 5/16" To 3/8" ID Step Up Hose Joiner

From £3.49 (£4.19 inc. VAT @ 20%)

Steel Step Up Hose Joiner from 5/16in To 3/8in ID Hose.Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor installations.

Product Image

MHJ1/4T - 1/4" ID Hose Push On Brass 'T' Piece

From £16.40 (£19.68 inc. VAT @ 20%)

T piece with hose tail fittings for 1/4" ID hose. Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor installations.

Product Image

MHJ5/16T - 5/16" ID Hose Push On Brass 'T' Piece

From £10.95 (£13.14 inc. VAT @ 20%)

T piece with hose tail fittings for 5/16" ID hose. Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor installations.

Product Image

MHJ3/8T - 3/8" ID Hose Push On Brass 'T' Piece

From £11.19 (£13.43 inc. VAT @ 20%)

T piece with hose tail fittings for 3/8" ID hose. Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor installations.

Product Image

MHJ3/8-5/16UT - 2 x 3/8" and 1 x 5/16" ID Hose Push on Unequal 'T' Piece

From £10.62 (£12.74 inc. VAT @ 20%)

Unequal T piece with hose tail fittings for 3/8 and 5/16" ID hose. Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor...

Product Image

MHJ1/4Y - 1/4" ID Hose Push On Brass Y' Piece

From £8.94 (£10.73 inc. VAT @ 20%)

Y piece with hose tail fittings for 1/4" ID hose. Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor installations.

Product Image

MHJ5/16Y - 5/16" ID Hose Push On Brass Y' Piece

From £10.07 (£12.08 inc. VAT @ 20%)

Y piece with hose tail fittings for 5/16" ID hose. Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor installations.

Product Image

MHJ3/8Y - 3/8" ID Hose Push On Brass Y' Piece

From £11.19 (£13.43 inc. VAT @ 20%)

Y piece with hose tail fittings for 3/8" ID hose. Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor installations.

Product Image

1/4BSPF-5/16C-90 - 1/4" BSP Female For 5/16" ID Hose

From £22.44 (£26.93 inc. VAT @ 20%)

90 degree female to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.