Stafford Vehicle Components

Orderline: +44 (0) 1684 219863

Remote Filter Heads, Plates & Oilstats

Store

Remote filter heads enable relocation of the oil filter where required. They are often used in conjunction with a take-off plate that can feed an oil cooler system, with or without a thermostatic element included.

Product Image

RFH1LR - Remote Filter head

From £38.40 (£46.08 inc. VAT @ 20%)

Remote Filter Head - Takes 3/4 UNF filter, flows L to R with no temperature take off port. 1/2" BSP connections

Product Image

RFH1RL - Remote Filter Head

From £38.40 (£46.08 inc. VAT @ 20%)

Remote Filter Head - Takes 3/4 UNF filter, flows R to L with no temperature take off port. 1/2" BSP connections

Product Image

RFH2RR - Right Right Remote Filter Head

From £43.69 (£52.43 inc. VAT @ 20%)

Oil flows in and out on the right hand side. Takes 3/4" UNF filter. Supplied with 1/2" NPT ports. Has a boss on top for gauge tapping. Dimensions 80mm x 105mm x 45mm. Both 80mm and 98mm diameter...

Product Image

RFH2LL - Left Left Remote Filter Head

From £39.63 (£47.56 inc. VAT @ 20%)

Oil flows in and out on the left hand side. Takes 3/4" UNF filter. Supplied with 1/2" BSP ports. Has a boss on top for gauge tapping. Dimensions 80mm x 105mm x 45mm. Both 80mm and 98mm diameter...

Product Image

RFH3TE - Top Entry Remote Filter Head

From £38.13 (£45.76 inc. VAT @ 20%)

Top-entry and exit filter head. Filter connection is 3/4" UNF, ports are 1/2" NPT. Dimensions 80mm x 100mm x 45mm

Product Image

RFH4AM - Four Port Remote Filter Head

From £61.87 (£74.24 inc. VAT @ 20%)

Has entry and exit ports on both sides
to provide a variety of options -
supplied with plugs to seal ports not
used. 3/4" UNF filter connection with 1/2" NPT ports. Dimensions 75mm x 105mm x 45mm

Product Image

RFH5TAM - Double Filter Remote Filter Head

From £76.80 (£92.16 inc. VAT @ 20%)

Takes two filters and has ports on both sides. Oil flows through both filters in
normal conditions or through remaining filter if one becomes blocked. Has a
boss on each main casting to take...

Product Image

OSP1 - Oil cooler take off plate - with 1/2" BSP female threads

From £35.48 (£42.58 inc. VAT @ 20%)

For Spin-On filter with 3/4" UNF connection - plates with other filter connections available special order - 5/8" UNF, M16, 13/16" UNF, M18, M20. Oil flow ports tapped 1/2" BSP. You will need to...

Product Image

OTP1 - Top plate for use with OSP1

From £28.50 (£34.20 inc. VAT @ 20%)

For 3/4" UNF spigot connection - these take off blanking plates are available with other spigot connections by special order - 5/8" UNF, M16, 13/16 UNF, M18, M20. Use with OSP1 to relocate the...

Product Image

TSP2 - Thermostatic oil cooler take off plate - with 1/2" BSP female threads

From £60.53 (£72.64 inc. VAT @ 20%)

For Spin-On 3/4" UNF Filter - Oil flow ports tapped 1/2" BSP. Fully open at 80 degrees C. You will need to fit a Flexolite oil filter adaptor kit to accommodate this plate if you have an older...

Product Image

TSP1 - Thermostatic oil cooler take off plate - with M22 x 1.5 female threads

From £62.95 (£75.54 inc. VAT @ 20%)

For Spin-On 3/4" UNF Filter - Oil flow ports tapped M22 x 1.5mm. Fully open at 80 degrees C. You will need to fit a Flexolite oil filter adaptor kit to accommodate this plate if you have an older...

Product Image

HFP1 - High flow thermostatic oil cooler take off plate - with M22 x 1.5 female threads

From £91.58 (£109.90 inc. VAT @ 20%)

Slightly larger than the TSP1, this plate allows higher flow rates. For Spin-On 3/4UNF Filter - Oil flow ports tapped M22 x 1.5mm. Fully open at 80 degrees C. You will need to fit a Flexolite oil...

Product Image

OSP3 - Oil cooler take off plate with two gauge connection tappings and M22 x 1.5 female threads

From £93.89 (£112.67 inc. VAT @ 20%)

M22 x 1.5 Oil flow ports and two x 1/8NPT plugged ports for temperature and pressure gauge feeds. You will need to fit a Flexolite oil filter adaptor kit to accomodate this plate if you have an...

Product Image

OSP2 - Oil cooler take off plate - with single gauge connection tapping and 1/2" BSP female threads

From £49.32 (£59.18 inc. VAT @ 20%)

1/2" BSP oil flow ports ports with one x 3/8BSP tapping for temperature or pressure gauge. Units with 5/8 UNF, 1/8 NPTF, M14, M16 and M18 gauge tapping available special order. You will need to...

Product Image
Photograph for illustrative purposes only - not actual product shown

RFH3AB - Filter head Billet

From £100.00 (£120.00 inc. VAT @ 20%)

Comparable to other manufacturer part numbers - RFH3AB,

Product Image

ILT2A - In line oil thermostat with 1/2" BSP female connections

From £128.75 (£154.50 inc. VAT @ 20%)

Cast alloy in-line thermostat. Supplied with mounting bracket. Thermostat fully open at 80ºC.

Product Image

ILT2B - In line oil thermostat with 1/2" BSP male connections

From £116.16 (£139.39 inc. VAT @ 20%)

Cast alloy in-line thermostat. Supplied with mounting bracket. Thermostat fully open at 80ºC.

Product Image

ILT2C - In line oil thermostat with 5/8" BSP male connections

From £119.49 (£143.39 inc. VAT @ 20%)

Cast alloy in-line thermostat. Supplied with mounting bracket. Thermostat fully open at 80ºC.

Product Image

ILT2E - In line oil thermostat with M22 x 1.5 female connections

From £128.47 (£154.16 inc. VAT @ 20%)

Cast alloy in-line thermostat. Supplied with mounting bracket. Thermostat fully open at 80ºC.

Product Image

ILT2D - In line oil thermostat with -10 JIC male fittings

From £116.64 (£139.97 inc. VAT @ 20%)

Cast alloy in-line thermostat. Supplied with mounting bracket. Thermostat fully open at 80ºC.

Product Image

ILT2F - In line oil thermostat with -8 JIC male fittings

From £119.49 (£143.39 inc. VAT @ 20%)

Cast alloy in-line thermostat. Supplied with mounting bracket. Thermostat fully open at 80ºC.

Product Image

ILT3A - Light weight in-line oil thermostat with 3/8" spigots for push on hose fitting.

From £55.59 (£66.71 inc. VAT @ 20%)

Cast/machined aluminium remote mounted oilstat. Opening temperature is 80 ºC as standard and controlled by a wax element. Requires no bracket - supported by oil lines.

Product Image

ILT3B - Light weight in-line oil thermostat with 1/2" spigots for push on hose fitting.

From £47.05 (£56.46 inc. VAT @ 20%)

Cast/machined aluminium remote mounted oilstat. Opening temperature is 80 ºC as standard and controlled by a wax element. Requires no bracket - supported by oil lines.

Product Image

FRPTOP1 - Oil filter relocation plate - for 3/4" UNF spigot

From £28.36 (£34.03 inc. VAT @ 20%)

Plate to allow relocation of oil filter - screws directly onto the oil filter spigot. For 3/4"UNF male spigot - ports tapped 1/2" BSP

Product Image

FRPTOP2 - Oil filter relocation plate - for 5/8" UNF spigot

From £44.94 (£53.93 inc. VAT @ 20%)

Plate to allow relocation of oil filter - screws directly onto the oil filter spigot. For 5/8" UNF male spigot - ports tapped 1/2" BSP

Product Image

FRPTOP3 - Oil filter relocation plate - for M16 spigot

From £24.58 (£29.50 inc. VAT @ 20%)

Plate to allow relocation of oil filter - screws directly onto the oil filter spigot. For M16 male spigot - ports tapped 1/2" BSP

Product Image

FRPTOP4 - Oil filter relocation plate - for 13/16" UNF spigot

From £28.36 (£34.03 inc. VAT @ 20%)

Plate to allow relocation of oil filter - screws directly onto the oil filter spigot. For 13/16" UNF male spigot - ports tapped 1/2" BSP

Product Image

FRPTOP5 - Oil filter relocation plate - for M18 spigot

From £27.12 (£32.54 inc. VAT @ 20%)

Plate to allow relocation of oil filter - screws directly onto the oil filter spigot. For M18 male spigot - ports tapped 1/2" BSP

Product Image

FRPTOP6 - Oil filter relocation plate - for M20 spigot

From £28.36 (£34.03 inc. VAT @ 20%)

Plate to allow relocation of oil filter - screws directly onto the oil filter spigot. For M20 male spigot - ports tapped 1/2" BSP

Product Image

SPH1 - Oil cooler take off plate for Austin Healey 100-6 and 3000

From £72.96 (£87.55 inc. VAT @ 20%)

Oil cooler take off plate for Healey 100-6 and 3000 models. Take off ports tapped 1/2" BSP. Allows connection of oil cooler system.

Product Image

SPF1 - Oil cooler take off plate for pre 1970 Ford

From £80.87 (£97.04 inc. VAT @ 20%)

Oil cooler take off plate for pre 1970 Ford models. Take off Ports tapped 3/8" BSP. Allows connection of oil cooler system.

Product Image

FTOP10 - Take off plate Jaguar

From £82.99 (£99.59 inc. VAT @ 20%)

Take-off plate that has a 1" UNF threaded Centre to suit some Jaguar engines or any filter heads with this thread. Machined from billet Aluminium and has 3/4" BSP take-off ports in the top to...

Comparable to other manufacturer part numbers - TOP10,

Product Image
Photograph for illustrative purposes only - not actual product shown

SPMG1 - Oil cooler take off plate for MG late TD and TF - for use with original oil filtration assembly

From £40.73 (£48.88 inc. VAT @ 20%)

Oil cooler take off plate for MG late TD and TF models. Take off ports tapped 3/8" BSP. Allows connection of oil cooler system in conjunction with original filter bowl arrangements

Product Image

SPT3 - Oil cooler take off plate for Triumph TR2/3/4a - in line fitting with original oil filtration assembly

From £60.32 (£72.38 inc. VAT @ 20%)

Oil cooler take off plate for TR2/3/4a models. Ports tapped 3/8" BSP. Allows connection of oil cooler system in conjunction with original filter bowl arrangements. Plate is 1.5" thick and...

Product Image

SPT1 - Oil cooler take off plate for Triumph 6 cylinder models - in line fitting with original oil filtration assembly

From £45.55 (£54.66 inc. VAT @ 20%)

Oil cooler take off plate for 6 cyl Triumph models. Ports tapped 3/8" BSP. Allows connection of oil cooler system in conjunction with original filter bowl arrangements. Plate is 1.5" thick and...

Product Image

SPT2 - Oil cooler take off plate for Triumph 6 cylinder models - 90 deg fitting with conversion to spin off filter

From £91.42 (£109.70 inc. VAT @ 20%)

Oil cooler take off plate for 6 cyl Triumph models. This plate can be used when there is insufficient room to fit SPT1. It provides oil take off ports for cooling and turns the filter through 90...

Product Image

SPT4 - Oil cooler take off plate for Triumph Dolomite and TR7 - replaces cover plate

From £63.49 (£76.19 inc. VAT @ 20%)

Oil cooler take off plate for Triumph TR7 and Dolomite models. Supplied with 1/2" BSP male male adaptors. Replaces a cover plate on the engine and allows connection of oil cooler system.

Product Image
Photograph for illustrative purposes only - not actual product shown

SPV - Oil cooler take off plate for Vauxhall Chevette Viva Firenza OHV

From £30.73 (£36.88 inc. VAT @ 20%)

Oil cooler take off plate for 4cyl Vauxhall Chevette Viva Firenza OHV pre spin off filter. Ports tapped 3/8" BSP. Allows connection of oil cooler system in conjunction with original filter head...