Min. Shipping : £0.00
VAT (20%): £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Vat is applicable to all UK orders.
Vat is also applicable to EU orders unless supported by a Valid EEC Vat number entered in your Account details (or when checking out).
THIS WILL BE CHECKED WHEN ORDERS ARE PROCESSED.
Sign in to your account or register new one to have full control over your orders.
New customer? Register
Dash rotary rheostat dimmer switch equivalent to Lucas part number78405. 6.4mm x 21mm hexagonal shaft. 0-12.5 Ohms resistance, four 6.3mm blade connections. Excludes knob (Lucas part number...
Thermostatic fan switch. Simple fitting switch which goes into the top hose. This switch kit is adjustable to turn your fan on between 60 and 120 degrees C.
Switch as Lucas PPG1 style light switch with pull/twist/pull action. Fits through 10mm hole max panel thickness 3mm with chrome retaining nut, hexagon shaft with spring loaded locating pin, three...
Hazard flasher warning switch kit (12v only). Switch with illuminated knob and flasher unit mounted onto a small bracket with cover for mounting underneath the dash or steering column, which wires...
Lucas type 31270 combined Ignition and Lighting Switch as fitted to a variety of British cars, including Austin Healey Sprite and Austin A40 Countryman. Supplied without Barrel & Key Assembly....
Brake light switch which connects to linkage with a spring. Electrical contacts 'breaks' on pull, in relaxed position the switch is on. No rubber cover .
Bulkhead fitting pull type starter switch (945), Lucas model type ST19-2, applicable for 6 or 12 volt application, all metal body with rubber shielded terminals for heavy cables.
Bulkhead fitting pull type starter switch (945), as Lucas model type ST19-2, applicable for 6 or 12 volt application, metal case with PVC terminal block. Terminals for heavy cables. A lower cost...
As Lucas pattern 51C 'pull on' brake switch, metal body 63mm wide x 35mm deep x 40mm tall with 51mm fixing hole centres, Screw terminals on top. Ford part reference Y-13480
Brake light switch, terminals protected by a rubber cover, connects to linkage with a spring, switch 30mm long x 33mm wide x 30mm tall with fixing hole centres 24mm, spring length including hook...
Brown bakelite type body, lever arm action which makes contact when pulled. fits to RHD cars/5cwt van & LHD E83W
Brown bakelite type body, lever arm action which makes contact when pulled. suits RHD E83W and LHD cars/5cwt van
FAE 24040 12V Brake light switch fitted with twin spade/Lucar connections. Supplied with slotted baseplate - slot is 8mm wide and 40mm long - and spring.
Floor mount starter switch for connecting directly into starter/battery cables, four mounting holes, two 5/16" terminals studs with nuts, as Lucas model ST18.
flange overall diameter 63.5mm, rear...
Starter switch which attaches to the motor case, as Lucas model type ST9, applicable for 6 or 12 volt applications. Ford part reference BE-11450
Rotary on-off turn switch with black knob with two flattened grips. short shank for metal dash, requires 19mm panel hole, bezel 22mm diameter. black knob with chrome bezel . as Lucas 31356 type S50.
Small round surface mount toggle on/off switch, 28mm diameter x approx 13mm tall cover. nickel/chrome plated cover (unscrews to get to terminals). only suitable for 6 volt or 12 volt, maximum...
interior light switch with stainless steel cover. slides on/off, suitable for door pillar application.
cover approx 27mm x 51mm, holes 35mm.
Twin terminal push switch with self-adjusting plunger. Universal vehicle application. Use on the "A" Pillar.
Push contact switch with general as well as Land Rover glove box applications 13mm x 20mm body with 12mm long 5mm diameter plunger. 2 x 6.3mm spade/Lucar connections
Rubber cover for CA1400 remote starter solenoid with button. Dimensions 27mm diameter x 17mm tall with a 17mm opening.
Flat blade steel ignition key for the PLC2 switch used on Austin 7 and Morris 8 etc, overall dimensions 32mm long x 19mmm wide, square tab 8mm deep x 7mm wide. 8mm hole in fob.
— part of Vintage and Classic Spares