Stafford Vehicle Components

Orderline: +44 (0) 1684 219863

£GBP
  • Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.

  • Vat is applicable to all UK orders.
    Vat is also applicable to EU orders unless supported by a Valid EEC Vat number entered in your Account details (or when checking out). THIS WILL BE CHECKED WHEN ORDERS ARE PROCESSED.

Brake & Clutch Hose & Pipe

Store
Product Image

KBP3/16 - Seamless Brake Pipe

From £35.18 (£42.22 inc. VAT @ 20%)

3/16" OD Kunifer brake pipe 25 foot roll. Seamless copper alloy tube. Application - all brake lines where flexibility is not required. The tube may be bent by hand or using a tool where tighter...

Stafford Vehicle Components - Brake System Components - Brake & Clutch Hose & Pipe
Product Image

TFE3 - - 3 TFE hose

From £9.72 (£11.66 inc. VAT @ 20%)

Extruded Teflon tube with stainless steel single wire braid cover (1/8" bore) commonly used for braking systems. A high pressure hose with excellent fluid compatibility and a cover resistant to...

Comparable to other manufacturer part numbers - 600-03,

Stafford Vehicle Components - Brake System Components - Brake & Clutch Hose & Pipe
Product Image

TFE4 - - 4 TFE hose

From £11.33 (£13.60 inc. VAT @ 20%)

Extruded Teflon tube with stainless steel single wire braid cover (3/16" bore) commonly used for clutch systems. A high pressure hose with excellent fluid compatibility and a cover resistant to...

Stafford Vehicle Components - Brake System Components - Brake & Clutch Hose & Pipe
Product Image

TFE3PVC - - 3 TFE hose with clear PVC cover

From £11.32 (£13.58 inc. VAT @ 20%)

Extruded Teflon tube with stainless steel single wire braid cover and clear PVC outer protective cover - cover must be cut back to take fittings. (1/8" bore) commonly used for braking systems. A...

Stafford Vehicle Components - Brake System Components - Brake & Clutch Hose & Pipe
Product Image

TFE4PVC - - 4 TFE hose with clear PVC cover

From £16.48 (£19.78 inc. VAT @ 20%)

Extruded Teflon tube with stainless steel single wire braid cover and clear PVC outer protective cover - cover must be cut back to take fittings. (3/16" bore) commonly used for clutch systems. A...

Stafford Vehicle Components - Brake System Components - Brake & Clutch Hose & Pipe
Product Image

BFRH2 - Brake Fluid Resistant Hose 8mm ID

From £12.73 (£15.28 inc. VAT @ 20%)

Use for gravity feed to master cylinder from remote reservoir. Special rubber liner with black outer cover. 5/16"/7.9mm ID 0.56"/14.22mm OD - Zero burst pressure. Priced PER METRE

Stafford Vehicle Components - Brake System Components - Brake & Clutch Hose & Pipe
Product Image

BFRH3 - Brake Fluid Resistant Hose 9.5mm ID

From £12.98 (£15.58 inc. VAT @ 20%)

Use for gravity feed to master cylinder from remote reservoir. Special rubber liner with black outer cover 3/8”/9.53mm ID 0.63"/16.00mm OD - Zero burst pressure. Priced PER METER

Stafford Vehicle Components - Brake System Components - Brake & Clutch Hose & Pipe
Product Image

POCS1 - Single 6mm hose clamp

From £0.42 (£0.50 inc. VAT @ 20%)

6mm Hose or tube clamp. Often used as bulkhead clamp to hold 1/4" brake pipe. Made from fire retardant polyamide.

Stafford Vehicle Components - Brake System Components - Brake & Clutch Hose & Pipe
Product Image

ZPRPC6 - Rubber lined steel 'P' clip for 6mm diameter tube

From £0.64 (£0.77 inc. VAT @ 20%)

6mm rubber lined Zinc Plated Steel 'P' Clip. Popular fitment for holding 1/4" brake pipe.

Stafford Vehicle Components - Brake System Components - Brake & Clutch Hose & Pipe