Stafford Vehicle Components

Orderline: +44 (0) 1684 219863

£GBP
  • Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.

  • Vat is applicable to all UK orders.
    Vat is also applicable to EU orders unless supported by a Valid EEC Vat number entered in your Account details (or when checking out). THIS WILL BE CHECKED WHEN ORDERS ARE PROCESSED.

Terminals

Store
Product Image

RTRIP - Tinned brass ring terminals - Wire crimp type, 2.7 to 10.5mm hole diameter - Pack of 10

From £0.90 (£1.08 inc. VAT @ 20%)

Electrolytically tinned brass ring terminals. Two sets of folding tabs. Very similar to original Ripaults T type terminals.  PACKS OF 10 PIECES.

Stafford Vehicle Components - Wiring - Terminals
Product Image

RT21 - Tinned brass ring terminals - Wire crimp type, 2.7 to 10.5mm hole diameter - Pack of 10 - Ring terminal with 2.7mm hole diameter - Pack of 10

From £0.90 (£1.08 inc. VAT @ 20%)

Electrolytically tinned brass ring terminals. Two sets of folding tabs. Very similar to original Ripaults T type terminals.  PACKS OF 10 PIECES.

2.7mm hole diameter. 6mm ring outer diameter....

Stafford Vehicle Components - Wiring - Terminals
Product Image

RT27 - Tinned brass ring terminals - Wire crimp type, 2.7 to 10.5mm hole diameter - Pack of 10 - Ring terminal with 4.3mm hole diameter - Pack of 10

From £0.95 (£1.14 inc. VAT @ 20%)

Electrolytically tinned brass ring terminals. Two sets of folding tabs. Very similar to original Ripaults T type terminals.  PACKS OF 10 PIECES.

4.3mm hole diameter. 7.5mm ring outer...

Stafford Vehicle Components - Wiring - Terminals
Product Image

RT3 - Tinned brass ring terminals - Wire crimp type, 2.7 to 10.5mm hole diameter - Pack of 10 - Ring terminal with 5.5mm hole diameter - Pack of 10

From £2.40 (£2.88 inc. VAT @ 20%)

Electrolytically tinned brass ring terminals. Two sets of folding tabs. Very similar to original Ripaults T type terminals.  PACKS OF 10 PIECES.

5.5mm hole diameter. 12.3mm ring outer...

Stafford Vehicle Components - Wiring - Terminals
Product Image

RT15 - Tinned brass ring terminals - Wire crimp type, 2.7 to 10.5mm hole diameter - Pack of 10 - Ring terminal with 6.5mm hole diameter - Pack of 10

From £2.50 (£3.00 inc. VAT @ 20%)

Electrolytically tinned brass ring terminals. Two sets of folding tabs. Very similar to original Ripaults T type terminals.  PACKS OF 10 PIECES.

6.5mm hole diameter. 12mm ring outer...

Stafford Vehicle Components - Wiring - Terminals
Product Image

RT30 - Tinned brass ring terminals - Wire crimp type, 2.7 to 10.5mm hole diameter - Pack of 10 - Ring terminal with 8.2mm hole diameter - Pack of 10

From £2.60 (£3.12 inc. VAT @ 20%)

Electrolytically tinned brass ring terminals. Two sets of folding tabs. Very similar to original Ripaults T type terminals.  PACKS OF 10 PIECES.

8.2mm hole diameter. 15mm ring outer...

Stafford Vehicle Components - Wiring - Terminals
Product Image

RT4 - Tinned brass ring terminals - Wire crimp type, 2.7 to 10.5mm hole diameter - Pack of 10 - Ring terminal with 10.4mm hole diameter - Pack of 10

From £2.70 (£3.24 inc. VAT @ 20%)

Electrolytically tinned brass ring terminals. Two sets of folding tabs. Very similar to original Ripaults T type terminals.  PACKS OF 10 PIECES.

10.4mm hole diameter. 18mm ring outer...

Stafford Vehicle Components - Wiring - Terminals
Product Image

RITER - Pre Insulated Crimp Ring Terminals for 0.5 to 1.5mm^2 cable

From £0.88 (£1.06 inc. VAT @ 20%)

High quality pre-insulated terminals suitable for use with standard automotive cables - 0.5 to 1.5 mm^2 (16/0.20 to 21/0.30) RED

Stafford Vehicle Components - Wiring - Terminals
Product Image

RITER37 - Pre Insulated Crimp Ring Terminals for 0.5 to 1.5mm^2 cable - 3.7mm hole - Pack of 10

From £0.88 (£1.06 inc. VAT @ 20%)

High quality pre-insulated terminals suitable for use with standard automotive cables - 0.5 to 1.5 mm^2 (16/0.20 to 21/0.30) RED

High quality pre-insulated terminals suitable for use with...

Stafford Vehicle Components - Wiring - Terminals
Product Image

RITER43 - Pre Insulated Crimp Ring Terminals for 0.5 to 1.5mm^2 cable - 4.3mm hole - Pack of 10

From £0.93 (£1.12 inc. VAT @ 20%)

High quality pre-insulated terminals suitable for use with standard automotive cables - 0.5 to 1.5 mm^2 (16/0.20 to 21/0.30) RED

High quality pre-insulated terminals suitable for use with...

Stafford Vehicle Components - Wiring - Terminals
Product Image

RITER53 - Pre Insulated Crimp Ring Terminals for 0.5 to 1.5mm^2 cable - 5.3mm hole - Pack of 10

From £1.07 (£1.28 inc. VAT @ 20%)

High quality pre-insulated terminals suitable for use with standard automotive cables - 0.5 to 1.5 mm^2 (16/0.20 to 21/0.30) RED

High quality pre-insulated terminals suitable for use with...

Stafford Vehicle Components - Wiring - Terminals
Product Image

RITER65 - Pre Insulated Crimp Ring Terminals for 0.5 to 1.5mm^2 cable - 6.4mm hole - Pack of 10

From £1.24 (£1.49 inc. VAT @ 20%)

High quality pre-insulated terminals suitable for use with standard automotive cables - 0.5 to 1.5 mm^2 (16/0.20 to 21/0.30) RED

High quality pre-insulated terminals suitable for use with...

Stafford Vehicle Components - Wiring - Terminals
Product Image

RITER84 - Pre Insulated Crimp Ring Terminals for 0.5 to 1.5mm^2 cable - 8.4mm hole - Pack of 10

From £1.47 (£1.76 inc. VAT @ 20%)

High quality pre-insulated terminals suitable for use with standard automotive cables - 0.5 to 1.5 mm^2 (16/0.20 to 21/0.30) RED

High quality pre-insulated terminals suitable for use with...

Stafford Vehicle Components - Wiring - Terminals
Product Image

RITEB - Pre Insulated Crimp Ring Terminals for 1.5 to 2.5mm^2 cable

From £0.93 (£1.12 inc. VAT @ 20%)

High quality pre-insulated terminals suitable for use with standard automotive cables - 1.5 to 2.5 mm^2 (21/0.30 to 35/0.30) BLUE

Stafford Vehicle Components - Wiring - Terminals
Product Image

RITEB37 - Pre Insulated Crimp Ring Terminals for 1.5 to 2.5mm^2 cable - 3.7mm hole - Pack of 10

From £0.93 (£1.12 inc. VAT @ 20%)

High quality pre-insulated terminals suitable for use with standard automotive cables - 1.5 to 2.5 mm^2 (21/0.30 to 35/0.30) BLUE

High quality pre-insulated terminals suitable for use with...

Stafford Vehicle Components - Wiring - Terminals
Product Image

RITEB43 - Pre Insulated Crimp Ring Terminals for 1.5 to 2.5mm^2 cable - 4.3mm hole - Pack of 10

From £1.07 (£1.28 inc. VAT @ 20%)

High quality pre-insulated terminals suitable for use with standard automotive cables - 1.5 to 2.5 mm^2 (21/0.30 to 35/0.30) BLUE

High quality pre-insulated terminals suitable for use with...

Stafford Vehicle Components - Wiring - Terminals
Product Image

RITEB53 - Pre Insulated Crimp Ring Terminals for 1.5 to 2.5mm^2 cable - 5.3mm hole - Pack of 10

From £1.24 (£1.49 inc. VAT @ 20%)

High quality pre-insulated terminals suitable for use with standard automotive cables - 1.5 to 2.5 mm^2 (21/0.30 to 35/0.30) BLUE

High quality pre-insulated terminals suitable for use with...

Stafford Vehicle Components - Wiring - Terminals
Product Image

RITEB65 - Pre Insulated Crimp Ring Terminals for 1.5 to 2.5mm^2 cable - 6.4mm hole - Pack of 10

From £1.47 (£1.76 inc. VAT @ 20%)

High quality pre-insulated terminals suitable for use with standard automotive cables - 1.5 to 2.5 mm^2 (21/0.30 to 35/0.30) BLUE

High quality pre-insulated terminals suitable for use with...

Stafford Vehicle Components - Wiring - Terminals
Product Image

RITEB84 - Pre Insulated Crimp Ring Terminals for 1.5 to 2.5mm^2 cable - 8.4mm hole - Pack of 10

From £1.53 (£1.84 inc. VAT @ 20%)

High quality pre-insulated terminals suitable for use with standard automotive cables - 1.5 to 2.5 mm^2 (21/0.30 to 35/0.30) BLUE

High quality pre-insulated terminals suitable for use with...

Stafford Vehicle Components - Wiring - Terminals
Product Image

BUTER - Pre Insulated Butt Terminal for 0.5 to 1.5mm^2 cable - Pack of 10

From £1.03 (£1.24 inc. VAT @ 20%)

High quality pre-insulated butt terminals suitable for use with standard automotive cables - 0.5 to 1.5 mm^2 (16/0.20 to 21/0.30) RED

Stafford Vehicle Components - Wiring - Terminals
Product Image

BUTEB - Pre Insulated Butt Terminal for 1.5 to 2.5mm^2 cable - Pack of 10

From £1.08 (£1.30 inc. VAT @ 20%)

High quality pre-insulated butt terminals suitable for use with standard automotive cables - 1.5 to 2.5 mm^2 (21/0.30 to 35/0.30) BLUE

Stafford Vehicle Components - Wiring - Terminals
Product Image

FISPR63 - Fully insulated FEMALE 6.3mm spade connector for for 0.5 to 1.5mm^2 cable - Pack of 10

From £1.07 (£1.28 inc. VAT @ 20%)

High quality FULLY pre-insulated FEMALE spade terminals suitable for use with standard automotive cables - 0.5 to 1.5 mm^2 (16/0.20 to 21/0.30) RED

Stafford Vehicle Components - Wiring - Terminals
Product Image

FISPB63 - Fully insulated FEMALE 6.3mm spade connector for for 1.5 to 2.5mm^2 cable - Pack of 10

From £1.12 (£1.34 inc. VAT @ 20%)

High quality FULLY pre-insulated FEMALE spade terminals suitable for use with standard automotive cables - 1.5 to 2.5 mm^2 (21/0.30 to 35/0.30) BLUE

Stafford Vehicle Components - Wiring - Terminals
Product Image

PISPFR63 - Partially insulated FEMALE 6.3mm spade connector for for 0.5 to 1.5mm^2 cable - Pack of 10

From £0.70 (£0.84 inc. VAT @ 20%)

High quality PARTIALLY pre-insulated FEMALE spade terminals suitable for use with standard automotive cables - 0.5 to 1.5 mm^2 (16/0.20 to 21/0.30) RED

Stafford Vehicle Components - Wiring - Terminals
Product Image

PISPFB63 - Partially insulated FEMALE 6.3mm spade connector for for 1.5 to 2.5mm^2 cable - Pack of 10

From £0.78 (£0.94 inc. VAT @ 20%)

High quality PARTIALLY pre-insulated FEMALE spade terminals suitable for use with standard automotive cables - 1.5 to 2.5 mm^2 (21/0.30 to 35/0.30) BLUE

Stafford Vehicle Components - Wiring - Terminals
Product Image

PISPMR63 - Partially insulated MALE 6.3mm spade connector for for 0.5 to 1.5mm^2 cable - Pack of 10

From £0.59 (£0.71 inc. VAT @ 20%)

High quality PARTIALLY pre-insulated MALE spade terminals suitable for use with standard automotive cables - 0.5 to 1.5 mm^2 (16/0.20 to 21/0.30) RED

Stafford Vehicle Components - Wiring - Terminals
Product Image

PISPMB63 - Partially insulated MALE 6.3mm spade connector for for 1.5 to 2.5mm^2 cable - Pack of 10

From £0.64 (£0.77 inc. VAT @ 20%)

High quality PARTIALLY pre-insulated MALE spade terminals suitable for use with standard automotive cables - 1.5 to 2.5 mm^2 (21/0.30 to 35/0.30) BLUE

Stafford Vehicle Components - Wiring - Terminals
Product Image

PISPPIGR - Partially insulated MALE/FEMALE piggyback 6.3mm spade connector for for 0.5 to 1.5mm^2 cable - Pack of 10

From £1.36 (£1.63 inc. VAT @ 20%)

High quality PARTIALLY pre-insulated MALE/FEMALE piggyback spade terminals suitable for use with standard automotive cables - 0.5 to 1.5 mm^2 (16/0.20 to 21/0.30) RED

Stafford Vehicle Components - Wiring - Terminals
Product Image

PISPPIGB - Partially insulated MALE/FEMALE piggyback 6.3mm spade connector for for 1.5 to 2.5mm^2 cable - Pack of 10

From £1.60 (£1.92 inc. VAT @ 20%)

High quality PARTIALLY pre-insulated MALE/FEMALE piggyback spade terminals suitable for use with standard automotive cables - 1.5 to 2.5 mm^2 (21/0.30 to 35/0.30) BLUE

Stafford Vehicle Components - Wiring - Terminals
Product Image

TNIF63 - 6.3mm Non Insulated FEMALE spade terminal - pack of 10

From £1.47 (£1.76 inc. VAT @ 20%)

Loose 6.3mm Non Insulated FEMALE spade terminal suitable for cable sizes 1.0 to 2.5mm^2. Sold in packs of 10. (Also known as 250 Series). For LUCAR 6.3mm spade connections.

Stafford Vehicle Components - Wiring - Terminals
Product Image

TNIB63 - 6.3mm Non Insulated FEMALE terminal boot - pack of 10

From £1.10 (£1.32 inc. VAT @ 20%)

Clear plastic boot for 6.3mm Non Insulated terminals suitable for cable sizes 0.65 to 1.5mm^2. Sold in packs of 10.

Stafford Vehicle Components - Wiring - Terminals
Product Image

BATM1 - 6.3mm Non Insulated MALE spade terminal with locking notch - pack of 10

From £1.12 (£1.34 inc. VAT @ 20%)

Loose 6.3mm Non Insulated MALE spade terminal suitable for cable sizes 0.75 to 2.0mm^2. Sold in packs of 10. Brass terminal with locking notch. As used in nylon connector housings BAT1 to 8.

Stafford Vehicle Components - Wiring - Terminals
Product Image

BATF1 - 6.3mm Non Insulated FEMALE spade terminal with locking notch - pack of 10

From £1.24 (£1.49 inc. VAT @ 20%)

Loose 6.3mm Non Insulated FEMALE spade terminal suitable for cable sizes 0.75 to 2.0mm^2. Sold in packs of 10. Brass terminal with locking notch. As used in nylon connector housings BAT1 to 8.

Stafford Vehicle Components - Wiring - Terminals
Product Image

LATM1 - Male pin terminal for LAT2 to 15 - pack of 10

From £0.93 (£1.12 inc. VAT @ 20%)

Loose terminals suitable for cable sizes 0.5 to 2.5mm^2. Sold in packs of 10. As used in LAT2 to 15

Stafford Vehicle Components - Wiring - Terminals
Product Image

LATF1 - Female pin terminal for LAT2 to 15 - pack of 10

From £0.93 (£1.12 inc. VAT @ 20%)

Loose Terminals suitable for cable sizes 0.5 to 2.5mm^2. Sold in packs of 10. As used in LAT2 to 15

Stafford Vehicle Components - Wiring - Terminals
Product Image

560 - Electrical terminal bullet end - Pack of 10 pieces

From £4.04 (£4.85 inc. VAT @ 20%)

Solder type nipples for snap connector, (note already supplied with parts 558 and 559 part numbers in 'Terminal and Connector Blocks'). 4.75mm diameter. Per packet of 10 pieces.

Stafford Vehicle Components - Wiring - Terminals
Product Image

560-push - Push in bullet connector - Pack of 10 pieces.

From £3.35 (£4.02 inc. VAT @ 20%)

Push in cable electrical terminal as used by Lucas in rolled end terminals on lamps and switches etc. Bared cable is pushed through the hollow middle and then pulled back over the outside before...

Stafford Vehicle Components - Wiring - Terminals
Product Image

560C1 - Electrical terminal bullet end - Crimp type for 1mm^2 wire. Pack of 10 pieces

From £2.90 (£3.48 inc. VAT @ 20%)

Crimp type nipples for snap connectors for 1mm^2 wire cross sectional area. Alternative to solder type (part number 560). 4.75mm bullet head diameter. Fits 558 and 559 part number snap connector...

Stafford Vehicle Components - Wiring - Terminals
Product Image

560C2 - Electrical terminal bullet end - Crimp type for 2mm^2 wire. Pack of 10 pieces

From £2.90 (£3.48 inc. VAT @ 20%)

Crimp type nipples for snap connectors for 2mm^2 wire cross sectional area. Alternative to solder type (part number 560). 4.75mm bullet head diameter. Fits 558 and 559 part number snap connector...

Stafford Vehicle Components - Wiring - Terminals
Product Image

721 - Ross courtney wiring terminal

From £8.18 (£9.82 inc. VAT @ 20%)

Ross courtney type wire end terminal (post terminal), pronged cup and washer two part terminal in self colour brass. A stripped wire is laid into the pronged cup with the flat washer put on top,...

Stafford Vehicle Components - Wiring - Terminals
Product Image

721A - Ross courtney wiring terminal - 4BA hole 1.00mm wire

From £8.21 (£9.85 inc. VAT @ 20%)

Ross courtney type wire end terminal (post terminal), pronged cup and washer two part terminal in self colour brass. A stripped wire is laid into the pronged cup with the flat washer put on top,...

Stafford Vehicle Components - Wiring - Terminals
Product Image

721B - Ross courtney wiring terminal - 3BA hole 2.00mm wire

From £8.18 (£9.82 inc. VAT @ 20%)

Ross courtney type wire end terminal (post terminal), pronged cup and washer two part terminal in self colour brass. A stripped wire is laid into the pronged cup with the flat washer put on top,...

Stafford Vehicle Components - Wiring - Terminals
Product Image

721C - Ross courtney wiring terminal - 2BA hole 2.00mm wire

From £8.95 (£10.74 inc. VAT @ 20%)

Ross courtney type wire end terminal (post terminal), pronged cup and washer two part terminal in self colour brass. A stripped wire is laid into the pronged cup with the flat washer put on top,...

Stafford Vehicle Components - Wiring - Terminals