Stafford Vehicle Components

Orderline: +44 (0) 1684 219863

£GBP
  • Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.

  • Vat is applicable to all UK orders.
    Vat is also applicable to EU orders unless supported by a Valid EEC Vat number entered in your Account details (or when checking out). THIS WILL BE CHECKED WHEN ORDERS ARE PROCESSED.

Oilers & Greasers

Store

Brass screw down cup greasers with a choice of threads including 1/8" BSP, 1/4" BSF and 5/16" BSW, with and without clicker action as indicated in product descriptions. A range of oilers including straight, angled, flip top and Winkley (rotating sleeve) pattern, offered with a selection of connections - push fit, 1/8" BSP, 1/4" BSF, 3/16" BSF and 5/16" BSF. Winkley pattern oilers are usually fitted horizontally and the outer sleeve turns to cover the oil hole. Most oilers are offered in a nickel finish only.

Product Image

310 - Cup greaser type RC1 - 1/8" BSP

From £32.06 (£38.47 inc. VAT @ 20%)

Brass screw down cup greaser, type RC1. Cap size 35mm diameter x 26mm deep, 1/8" BSP thread only. Stands up approx 45mm when fitted. No clicker action.

Stafford Vehicle Components - Oil System & Lubrication - Oil & Grease Application - Oilers & Greasers
Product Image

313 - Cup greaser type RC5 - 1/8" BSP

From £27.73 (£33.28 inc. VAT @ 20%)

Bass screw down cup greaser, type RC5, cap size 28mm diameter x 17mm deep, 1/8" BSP thread. NO clicker action.

Stafford Vehicle Components - Oil System & Lubrication - Oil & Grease Application - Oilers & Greasers
Product Image

314 - Cup greaser type RC6 - 1/8" BSP

From £26.65 (£31.98 inc. VAT @ 20%)

Brass screw down cup greaser, type RC6. Cap size 19mm diameter x 15mm deep, 1/8" BSP thread. With clicker action from spring clip under cap and groove inside body.

Stafford Vehicle Components - Oil System & Lubrication - Oil & Grease Application - Oilers & Greasers
Product Image

315 - Cup greaser type RC7 - 5/16" BSW

From £22.36 (£26.83 inc. VAT @ 20%)

Brass screw down cup greaser with clicker action in lid, cap size 16mm diameter x 11mm deep, 5/16"BSW thread. Height when fitted approx 18mm.

Stafford Vehicle Components - Oil System & Lubrication - Oil & Grease Application - Oilers & Greasers
Product Image

316 - Cup greaser type RC11 - 1/4" BSF

From £19.74 (£23.69 inc. VAT @ 20%)

Brass screw down cup greaser, type RC11. Cap size 11mm diameter x 11mm deep, 1/4" BSF thread.

Stafford Vehicle Components - Oil System & Lubrication - Oil & Grease Application - Oilers & Greasers
Product Image

316A - Screw down lubricator - 1/4" BSP

From £9.73 (£11.68 inc. VAT @ 20%)

Brass screw down Stauffer cup lubricator, 21mm diameter, 1/4" BSP thread.

Stafford Vehicle Components - Oil System & Lubrication - Oil & Grease Application - Oilers & Greasers
Product Image

316B - Screw down lubricator - 1/4" BSP

From £16.18 (£19.42 inc. VAT @ 20%)

Brass screw down Stauffer cup lubricator, 35mm diameter 1/4" BSP thread.

Stafford Vehicle Components - Oil System & Lubrication - Oil & Grease Application - Oilers & Greasers
Product Image

322 - Flip top oiler - 1/4" BSF

From £7.33 (£8.80 inc. VAT @ 20%)

Flip top flap oiler, nickel plate finish, 3/8" hexagon, 1/4" x 26 TPI thread.

Stafford Vehicle Components - Oil System & Lubrication - Oil & Grease Application - Oilers & Greasers
Product Image

323 - Flip top oiler - 1/8" BSP

From £8.63 (£10.36 inc. VAT @ 20%)

Flip top flap oiler, nickel plate finish, 7/16 hexagon, 1/8" BSP thread.

Stafford Vehicle Components - Oil System & Lubrication - Oil & Grease Application - Oilers & Greasers
Product Image

458 - Flip top oiler - 3/16" drive in fit

From £3.05 (£3.66 inc. VAT @ 20%)

Flip top flap oiler, nickel plate finish, push fit into a 3/16" hole.

Stafford Vehicle Components - Oil System & Lubrication - Oil & Grease Application - Oilers & Greasers
Product Image

535 - Flip top oiler - 1/4“ drive in fit

From £3.75 (£4.50 inc. VAT @ 20%)

Flip top flap oiler, nickel plate finish, push fit into 1/4“ hole.

Stafford Vehicle Components - Oil System & Lubrication - Oil & Grease Application - Oilers & Greasers
Product Image

535-ANG - Flip top oiler - 90° angled, 1/4" drive in fit

From £6.17 (£7.40 inc. VAT @ 20%)

Angled 90° spring loaded flip top oiler, nickel plate finish, push fit into 1/4“ hole. Overall dimensions 20mm long x 14.5mm tall

Stafford Vehicle Components - Oil System & Lubrication - Oil & Grease Application - Oilers & Greasers
Product Image

939 - Flip top oiler - 90° angled, 1/4"BSF

From £5.41 (£6.49 inc. VAT @ 20%)

Small angled flip top flap oiler, 1/4" BSF thread

Stafford Vehicle Components - Oil System & Lubrication - Oil & Grease Application - Oilers & Greasers
Product Image

CA257A - TAT type grease/oil nipples - 1/8" BSP, long reach

From £10.46 (£12.55 inc. VAT @ 20%)

Extended type brass hexagonal flat top TAT type, grease nipple, 1/8" BSPT thread x 22mm length (not including thread). Use grease gun adaptor 108A, 108B or 108C

Stafford Vehicle Components - Oil System & Lubrication - Oil & Grease Application - Oilers & Greasers
Product Image

CA480 - Small flip top cup oiler - 1/4" BSF

From £4.11 (£4.93 inc. VAT @ 20%)

Small flip top flap oiler, self colour brass finish, 1/4" (6.6mm) hexagon, 1/4" x 26 TPI thread (1/4"BSF), only 6mm tall. This oiler is particularly used on bicycles

Stafford Vehicle Components - Oil System & Lubrication - Oil & Grease Application - Oilers & Greasers
Product Image

CA485 - Winkley pattern oiler - Rotating sleeve, 1/4" BSF

From £11.85 (£14.22 inc. VAT @ 20%)

Winkley pattern rotating sleeve oiler, nickel finish. 1/4" BSF thread (26 TPI) x 18mm tall overall. These are usually fitted horizontally and the outer sleeve turns to cover the oil hole.

Stafford Vehicle Components - Oil System & Lubrication - Oil & Grease Application - Oilers & Greasers
Product Image

CA486 - Winkley pattern oiler - Rotating sleeve, 1/8" BSP

From £13.40 (£16.08 inc. VAT @ 20%)

Winkley pattern rotating sleeve oiler, nickel finish. 1/8" BSP thread x 23.5mm tall overall. These are usually fitted horizontally and the outer sleeve turns to cover the oil hole.

Stafford Vehicle Components - Oil System & Lubrication - Oil & Grease Application - Oilers & Greasers
Product Image

CA487 - Winkley pattern oiler - Rotating sleeve, 5/16" x 16 TPI cycle thread

From £6.36 (£7.63 inc. VAT @ 20%)

Winkley pattern rotating sleeve oiler, nickel finish. 5/16" x 26 TPI cycle thread x 22mm tall overall. These are usually fitted horizontally and the outer sleeve turns to cover the oil hole. This...

Stafford Vehicle Components - Oil System & Lubrication - Oil & Grease Application - Oilers & Greasers
Product Image

CA734 - Winkley pattern oiler - Rotating sleeve, 3/16" BSF

From £11.25 (£13.50 inc. VAT @ 20%)

Winkley pattern rotating sleeve oiler, nickel finish. 3/16" BSF thread (32 TPI) x 18mm tall overall. These are usually fitted horizontally and the outer sleeve turns to cover the oil hole.

Stafford Vehicle Components - Oil System & Lubrication - Oil & Grease Application - Oilers & Greasers
Product Image

CA735 - Winkley pattern oiler - Rotating sleeve, 5/16" BSW

From £11.25 (£13.50 inc. VAT @ 20%)

Winkley pattern rotating sleeve oiler, nickel finish. 5/16" BSW thread (18 TPI) x 20mm tall overall. These are usually fitted horizontally and the outer sleeve turns to cover the oil hole.

Stafford Vehicle Components - Oil System & Lubrication - Oil & Grease Application - Oilers & Greasers