Stafford Vehicle Components

Orderline: +44 (0) 1684 219863

Bonnet Tape, Catches & Corners

Store
Product Image

116 - Bonnet catch with bonnet plate and stud

From £68.95 (£82.74 inc. VAT @ 20%)

Chrome plate bonnet catch as fitted to Morris Minor, MG J2, Wolseley Hornet etc. the catch has a kidney shape plate to allow movement. Catch size 133mm overall.

Product Image

138 - Bonnet catch

From £25.31 (£30.37 inc. VAT @ 20%)

Pull bonnet catch from a Wilmot Breeden pattern as used as original equipment for Morris 8, Morgan etc. chrome on brass, approx 4.75" / 120mm long. complete with bonnet catch plate. Hole centres...

Product Image

148 - Bonnet catch

From £29.35 (£35.22 inc. VAT @ 20%)

Small top quality catch, approx 4.25" / 110mm long overall, complete with catch plate, chromium plated on brass, small rubber buffer on back. base plate and catch plate same size (40mm x 19mm with...

Product Image

149 - Bonnet catch

From £33.70 (£40.44 inc. VAT @ 20%)

Large top quality catch approx 135mm overall complete with catch plate, chromium or nickel plated on brass. mountings approx 90mm apart

Product Image

149-n - Bonnet catch - Nickel

From £33.70 (£40.44 inc. VAT @ 20%)

Large top quality catch approx 135mm overall complete with catch plate, chromium or nickel plated on brass. mountings approx 90mm apart

Nickel finish

Product Image

149-c - Bonnet catch - Chrome

From £33.70 (£40.44 inc. VAT @ 20%)

Large top quality catch approx 135mm overall complete with catch plate, chromium or nickel plated on brass. mountings approx 90mm apart

Chrome finish

Product Image

403 - Screw down bonnet catch

From £53.80 (£64.56 inc. VAT @ 20%)

Screw down bonnet catch which bolts to the outside of the bonnet panel, new manufacture, 4 mounting holes approx approx 28mm and 24mm apart vertically on 48mm round base, chromium top, approx 85mm...

Product Image

403-CP - Screw down bonnet catch - 4 Lobe all chrome plain top

From £53.80 (£64.56 inc. VAT @ 20%)

Screw down bonnet catch which bolts to the outside of the bonnet panel, new manufacture, 4 mounting holes approx approx 28mm and 24mm apart vertically on 48mm round base, chromium top, approx 85mm...

Product Image

403-CT - Screw down bonnet catch - 5 Lobe Tenax pattern all chrome

From £53.80 (£64.56 inc. VAT @ 20%)

Screw down bonnet catch which bolts to the outside of the bonnet panel, new manufacture, 4 mounting holes approx approx 28mm and 24mm apart vertically on 48mm round base, chromium top, approx 85mm...

Product Image

403-CR - Screw down bonnet catch - 4 Lobe Ripaults marked all chrome

From £57.88 (£69.46 inc. VAT @ 20%)

Screw down bonnet catch which bolts to the outside of the bonnet panel, new manufacture, 4 mounting holes approx approx 28mm and 24mm apart vertically on 48mm round base, chromium top, approx 85mm...

Product Image

426 - Bonnet catch

From £27.45 (£32.94 inc. VAT @ 20%)

High quality spring loaded pull catch with loop finger pull ring, powder coated finish, complete with pocket. Approximately 118mm long. Chrome finger pull ring. Hook for pocket approximately 80mm...

Product Image

A-16750 - Bonnet catch

From £25.37 (£30.44 inc. VAT @ 20%)

Bonnet/hood catch supplied with pocket. polished stainless steel parts, 91mm tall overall, base 55mm wide. choice of 2 hole mount (13mm deep) or 3 hole mount (30mm deep).

Product Image

A-16750-3 - Bonnet catch - three hole mount bracket

From £25.37 (£30.44 inc. VAT @ 20%)

Bonnet/hood catch supplied with pocket. polished stainless steel parts, 91mm tall overall, base 55mm wide. choice of 2 hole mount (13mm deep) or 3 hole mount (30mm deep).

Product Image

A-16750-2 - Bonnet catch - two hole mount bracket

From £28.37 (£34.04 inc. VAT @ 20%)

Bonnet/hood catch supplied with pocket. polished stainless steel parts, 91mm tall overall, base 55mm wide. choice of 2 hole mount (13mm deep) or 3 hole mount (30mm deep).

Product Image

CA236A - Bonnet catch T top pattern

From £26.42 (£31.70 inc. VAT @ 20%)

Stainless steel bonnet catch with T bar grip pattern. 95mm long, two screw base (mount holes 35mm centres) mounts horizontally.

Product Image

468 - Bonnet catch

From £9.20 (£11.04 inc. VAT @ 20%)

Open spring bonnet catch, nickel plate finish, 125mm long, a good value spring catch to hold a bonnet down, supplied with top catch.

Product Image

839A - Rubber bonnet fastener - small

From £3.44 (£4.13 inc. VAT @ 20%)

Small rubber hook with zinc plated bracket and clip. overall length approx 54mm. maximum extension from relaxed to tension not to exceed 10%.

Product Image

839 - Rubber bonnet fastener

From £4.18 (£5.02 inc. VAT @ 20%)

Rubber hook with zinc plated bracket and clip. overall length approx 122mm. maximum extension from relaxed to tension not to exceed 10%.

Product Image

BONREL1 - Bonnet release cable - Black

From £12.45 (£14.94 inc. VAT @ 20%)

Bonnet release cable with black plastic T shaped handle with 'Raised bonnet' symbol. Flanged (1/2" diameter) threaded (1/2" long) feed through with nut and shake proof washer. 75mm straight shaft,...

Product Image

BONREL2 - Bonnet release cable - Red

From £17.95 (£21.54 inc. VAT @ 20%)

Bonnet release cable with red plastic T shaped handle. Flanged (20mmdiameter) threaded (16mm long) feed through with nut and shake proof washer. 75mm straight shaft, 1.5m red flexible outer (5mm...

Product Image

270 - Bonnet tape flat type 3/8" (10mm)

From £5.42 (£6.50 inc. VAT @ 20%)

10mm wide x approx 3mm thick. this product is impregnated to produce a dark brown stiff beading (as original product) which will acts as the rubbing tape between bonnet (hood) and radiator cowl...

Product Image

232 - Bonnet tape flat type 3/4" (19mm)

From £6.21 (£7.45 inc. VAT @ 20%)

19mm wide x approx 3mm thick. This product is impregnated to produce a dark brown stiff beading (as the original product) which will act as the rubbing tape between bonnet (hood), radiator cowl...

Product Image

231 - Bonnet tape flat type 1/2" (13mm)

From £5.88 (£7.06 inc. VAT @ 20%)

13mm wide x approx 3mm thick. This product is impregnated to produce a dark brown stiff beading (as the original product) which will act as the rubbing tape between bonnet (hood), radiator cowl...

Product Image

271 - Bonnet tape flat type 5/8" (16mm)

From £6.16 (£7.39 inc. VAT @ 20%)

16mm wide x approx 3mm thick. this product is impregnated to produce a dark brown stiff beading (as original product) which will acts as the rubbing tape between bonnet (hood) and radiator cowl...

Product Image

248 - Bonnet tape flat type 1" (25mm)

From £7.01 (£8.41 inc. VAT @ 20%)

25mm wide x approx 3mm thick. this product is impregnated to produce a dark brown stiff beading (as original product) which will acts as the rubbing tape between bonnet (hood) and radiator cowl...

Product Image

920 - Bonnet tape flat type 1-1/4" (32mm)

From £7.18 (£8.62 inc. VAT @ 20%)

32mm wide x approx 3mm thick. this product is impregnated to produce a dark brown stiff beading (as original product) which will acts as the rubbing tape between bonnet (hood) and radiator cowl...

Product Image

880 - Bonnet tape beaded type 1/2" (13mm)

From £5.60 (£6.72 inc. VAT @ 20%)

13mm wide x approx 4.5mm thick. this product is impregnated to produce a dark brown stiff beading (as original product) which will acts as the rubbing tape between bonnet (hood) and radiator cowl...

Product Image

246 - Bonnet tape beaded type 5/8" (16mm)

From £6.33 (£7.60 inc. VAT @ 20%)

16mm wide x approx 4.5mm thick. this product is impregnated to produce a dark brown stiff beading (as original product) which will acts as the rubbing tape between bonnet (hood) and radiator cowl...

Product Image

230 - Bonnet tape beaded type 3/4" (19mm)

From £6.83 (£8.20 inc. VAT @ 20%)

19mm wide x approx 4.5mm thick. This product is impregnated to produce a dark brown stiff beading (as the original product) which will act as the rubbing tape between bonnet (hood), radiator cowl...

Product Image

247 - Bonnet tape beaded type 1" (25mm)

From £10.22 (£12.26 inc. VAT @ 20%)

25mm wide x approx 4.5mm thick. this product is impregnated to produce a dark brown stiff beading (as original product) which will acts as the rubbing tape between bonnet (hood) and radiator cowl...

Product Image

654 - Bifurcated copper split rivet

From £2.75 (£3.30 inc. VAT @ 20%)

Copper bifurcated rivet, 7.5mm head, stem 3.8mm x 11mm. for fixing bonnet tape etc. Per packet 10

Product Image

260H - Holdtite rubber bonnet corner

From £2.97 (£3.56 inc. VAT @ 20%)

Right angle, original Holdtite pattern, side approx 45mm

Product Image

260P - Plain Rubber Bonnet Corner

From £2.47 (£2.96 inc. VAT @ 20%)

Right angle, plain pattern, side approx 45mm

Product Image

571 - Rubber bonnet corner

From £2.55 (£3.06 inc. VAT @ 20%)

Angled (60°) approx 30mm side.

Product Image

572 - Rubber bonnet corner

From £2.44 (£2.93 inc. VAT @ 20%)

Angled 50° approx 45mm side, heavy corner.

Product Image

573 - Rubber bonnet corner

From £3.28 (£3.94 inc. VAT @ 20%)

Centre side rubber approx 35mm wide.

Product Image

7W-16625 - Rubber bonnet corner

From £2.77 (£3.32 inc. VAT @ 20%)

Black moulded part with metal interbonded plate