Stafford Vehicle Components

Orderline: +44 (0) 1684 219863

Bulb Holders

Store
Product Image

H1BH - H1 Bulb Holder

From £1.46 (£1.75 inc. VAT @ 20%)

H1 headlamp socket ceramic connector. 11mm high, 15.1mm wide and 25mm long. With 10cm long single cable tail.

Product Image

H4BHC - H4 bulb holder - Ceramic

From £2.55 (£3.06 inc. VAT @ 20%)

H4 P43T headlamp socket ceramic connector. 21mm high, 27mm wide and 24mm long. With 10cm long blue white and black cable tails.

Product Image

H4BHP - H4 bulb holder - Plastic with brass flag terminals

From £1.95 (£2.34 inc. VAT @ 20%)

Standard plastic H4 headlamp socket. 219mm high, 26mm wide and 21mm long. Supplied with three brass flag terminals for crimping on to wire and connecting to male Lucar/spade terminals

Product Image

5825W - Headlamp wiring harness - H4 with wired terminals

From £5.15 (£6.18 inc. VAT @ 20%)

Made in house and fitted to the head lamp units we assemble, BS specified wiring and wire colours. Approximate length 45cm

Comparable to other manufacturer part numbers - 5825W, BAU2110

Product Image

H7BH - H7 Bulb Holder

From £2.03 (£2.44 inc. VAT @ 20%)

H7 headlamp socket ceramic connector. 14.5mm high, 20.5mm wide and 23.5mm long. With two 10cm long single cable tails.

Product Image

H1UPGRADE - H1 P14.5S base - Halogen upgrade kit for British Pre-focus spot lamps

From £9.15 (£10.98 inc. VAT @ 20%)

This is a conversion kit for traditional Spot, Fog or Driving lights that use the British Pre Focus type bulbs (BPF P36S) - enabling use of modern H1 P14.5S base 55w bulbs to provide more light...

Comparable to other manufacturer part numbers - H1UPGRADE

Product Image

357-BPF - British Pre-focus headlamp connection with lead

From £12.89 (£15.47 inc. VAT @ 20%)

British Pre-focus headlamp connector with lead, double contact with three pin bayonet bulb holder, three wires with headlamp bowl sealing grommet and soldered bullet connecters, overall length 910mm.

Product Image

700BH - 700 Bulb Holder for FT700 & CLR700 fog/spot lamps

From £16.95 (£20.34 inc. VAT @ 20%)

High quality bakelite bulb holder for FT700 and CLR700 light units. Double contact, but one contact can be bent away to make single contact. 71.5mm OD, screw on, min ID 38.5 max ID 45mm

Product Image

153 - Bulbholder

From £10.85 (£13.02 inc. VAT @ 20%)

Replacement general purpose bulb holder (accepts 15mm base bulb). Offered for various bulbs configurations.
1156/SCC/BA15S single contact parallel pin, SBC/BA15D double contact parallel pin,...

Product Image

153s - Bulbholder - Single contact parallel pin BA15S

From £10.85 (£13.02 inc. VAT @ 20%)

Replacement general purpose bulb holder (accepts 15mm base bulb). Offered for various bulbs configurations.
1156/SCC/BA15S single contact parallel pin, SBC/BA15D double contact parallel pin,...

Product Image

153e - Bulbholder - Double contact parallel pin BA15D

From £10.85 (£13.02 inc. VAT @ 20%)

Replacement general purpose bulb holder (accepts 15mm base bulb). Offered for various bulbs configurations.
1156/SCC/BA15S single contact parallel pin, SBC/BA15D double contact parallel pin,...

Product Image

153o - Bulbholder - Double contact offset pin BAY15D

From £10.85 (£13.02 inc. VAT @ 20%)

Replacement general purpose bulb holder (accepts 15mm base bulb). Offered for various bulbs configurations.
1156/SCC/BA15S single contact parallel pin, SBC/BA15D double contact parallel pin,...

Product Image

853 - Headlamp converter bulb holder - SBC/BA15D double contact

From £10.96 (£13.15 inc. VAT @ 20%)

Double contact headlamp converter for most many headlamps which are mounted through the rear of reflector bowl - usually held in place with clamp clip not supplied. Dimensions:- 17mm outside...

Product Image

422 - Bulb holder single ended SBC/BA15D double contact

From £16.09 (£19.31 inc. VAT @ 20%)

Single ended bulb holder. Dimensions thread diameter 19mm, overall length 38mm, flange 28.5mm. Accepts SBC/BA15D bulb, rear nut removes to expose terminal contacts. Double contact.

Product Image

422-INSERT - Bulb holder single ended insert SBC/BA15D double contact

From £4.95 (£5.94 inc. VAT @ 20%)

Double contact bulb holder insert, fits our 422 bulb holder, two spring loaded brass bulb contacts at one end with two wire terminals at the other, insulator body dimensions 16mm long x 16.7mm...

Product Image

BA15BH - Replacement BA15 bulb holders

From £3.44 (£4.13 inc. VAT @ 20%)

Metal cased replacement bulbholder. outside 16.4mm x approx 23.5mm long.
Offered with single (equal pin) or double (offset pin) contacts.

Comparable to other manufacturer part numbers - 0705

Product Image

BA15SBH - Replacement BA15 bulb holders - Single contact BA15s

From £3.49 (£4.19 inc. VAT @ 20%)

Metal cased replacement bulbholder. outside 16.4mm x approx 23.5mm long.
Offered with single (equal pin) or double (offset pin) contacts.

Comparable to other manufacturer part numbers - 0705s

Product Image

BAY15DBH - Replacement BA15 bulb holders - Double contact BAY15d offset pin

From £3.44 (£4.13 inc. VAT @ 20%)

Metal cased replacement bulbholder. outside 16.4mm x approx 23.5mm long.
Offered with single (equal pin) or double (offset pin) contacts.

Offset pin

Comparable to other manufacturer part numbers - 0705d

Product Image

153-SL - Single contact BA15s bulbholder with wire tail

From £9.83 (£11.80 inc. VAT @ 20%)

Single contact BA15s bulbholder with wire tail. Measures outside 17mm x 26mm long. Note the two barb tags to the side to hold this in place.

Product Image

211-CONV - Bulb holder sleeve (offset pin BAY15D) to convert 211 'Duolamp' lamps to Stop & Tail

From £11.36 (£13.63 inc. VAT @ 20%)

Bulb holder sleeve (offset pin BAY15D) and cotton braid pig tail wires which will fit into part number 211 series 'Duolamp' type lamps to enable a small (19mm diameter) globe double contact bulb...

Product Image

SLBH1 - Push in plastic bulb holder for capless bulbs.

From £3.07 (£3.68 inc. VAT @ 20%)

Push in plastic bulb holder for capless bulbs. Supplied with two wire crimp terminals for capless bulbs. Fits jewel lights, ST38 conversion and 1130 conversions. Dimensions main body 28mm long x...

Comparable to other manufacturer part numbers - SLBH, S6005

Product Image

SLBH2 - Push in black plastic capless bulb holder - tube type

From £2.40 (£2.88 inc. VAT @ 20%)

Black nylon capless bulb holder - tube type. Fits many side light apertures including Wipac type lights and also Smiths Gauges. Supplied with two crimp wire terminals to allow fitting of capless...

Comparable to other manufacturer part numbers - SVC-13-1567-BK

Product Image

SLBH3 - Black plastic tube type T10 WEDGE bulb holder - WIRED PUSH IN

From £2.90 (£3.48 inc. VAT @ 20%)

Black nylon capless bulb holder - tube type. Fits in many side light apertures including Wipac type lights and also Smiths Gauges. Supplied with wired terminals to allow fitting of capless T10 and...

Product Image

T10BH - T10 wedge bulb holder - WIRED TWIST IN

From £3.25 (£3.90 inc. VAT @ 20%)

Twist fit bulb holder for T10 wedge base. 15mm aperture diameter.

Product Image

927 - MCC/BA9S bulb holder - single contact

From £2.32 (£2.78 inc. VAT @ 20%)

MCC/BA9s bulb holder, 10.4mm diameter, useful general application spare for equal pin bayonet base 9mm cap bulbs. Single contact.

Product Image

927A - MCC/BA9S bulb holder - single contact

From £6.16 (£7.39 inc. VAT @ 20%)

MCC/BA9s bulb holder. 12.3mm diameter, overall length 18.5mm, useful general application spare for bayonet base 9mm cap equal pin bulbs. single contact, supplied with connectors and terminals.

Product Image

CAB302 - Back light bulb holder for Smiths instrument gauges

From £10.90 (£13.08 inc. VAT @ 20%)

Spring clip mounted single contact bulb holder to hold MES E10 (11mm globe diameter) 2.2W screw in bulb (B987) as back light for instrument gauges. 6 spring clips push in to a 16mm diameter hole....

Product Image
Photograph for illustrative purposes only - not actual product shown

BA7SBH - BA7S Bulb holder single contact

From £2.85 (£3.42 inc. VAT @ 20%)

BA7S bulb holder fitted with 12V 2W bulb. Twin 6.3mm push on/Lucar rear terminal connections. For replacement bulbs please order B282 (6V) or B281 (12V)

Product Image

776BH - Bulbholder 3 x BA15S holders - divider plate for ST38 type lamp

From £16.55 (£19.86 inc. VAT @ 20%)

Replacement bulb holder divider plate for 'Pork Pie' ST38 type rear lamp. Accepts 3 x BA15S bulbs

Comparable to other manufacturer part numbers - ST38

Product Image

ST38CONV - ST38 Indicator Conversion Kit

From £32.42 (£38.90 inc. VAT @ 20%)

Conversion kit to modify your 'Pork Pie' ST38 light to also give amber turn indication. New bulbs and bulb holders, special red and amber lens. This kit will fit original Lucas type ST38 lamps as...

Comparable to other manufacturer part numbers - 0038CONV

Product Image

CA605 - Bulb holder BA15 on mounting plate

From £8.07 (£9.68 inc. VAT @ 20%)

Useful bulb holder (BA15) with bracket, (60mm x 16mm) which can be bent as necessary.

Product Image

CA605S - Bulb holder BA15 on mounting plate - Single contact BA15S bulb holder

From £8.14 (£9.77 inc. VAT @ 20%)

Useful bulb holder (BA15) with bracket, (60mm x 16mm) which can be bent as necessary.

Product Image

CA605D - Bulb holder BA15 on mounting plate - Double contact BA15D equal pin bulb holder

From £8.07 (£9.68 inc. VAT @ 20%)

Useful bulb holder (BA15) with bracket, (60mm x 16mm) which can be bent as necessary.

Product Image

424 - Bulbholder for 1130 sidelamp BA15D equal pin double contact

From £16.68 (£20.02 inc. VAT @ 20%)

Double contact bulb holder for Lucas 1130 type side lamp, accepts double contact SBC Ba15d parallel pin bulbs. Please note these are made to original pattern.

Product Image

424A - 1130 Sidelamp Bulbholder (twin bulb) Amber and Clear (Pair)

From £51.18 (£61.42 inc. VAT @ 20%)

Two bulbs (amber for flasher, clear for sidelamp) - 12 volt ONLY - bulb holder for fitting into Lucas type 1130 sidelamps - our 297 part number series. Supplied in pairs only. Mounting plate...

Product Image

1130BH-SC - 1130 lamp bulb holder - BA15S Single Contact

From £18.95 (£22.74 inc. VAT @ 20%)

1130 lamp bulb holder. BA15S base for single contact, equal pin bulbs - B382 for 12v and B317 for 6V 5W

Comparable to other manufacturer part numbers - 1130BH

Product Image

1130BH-DC - 1130 lamp bulb holder - BAY15D Double Contact Offset Pin

From £18.95 (£22.74 inc. VAT @ 20%)

1130 lamp bulb holder. BAY15D base for double contact, offset pin bulbs - B380 for 12V and B384 for 6V 21/5w

Comparable to other manufacturer part numbers - 1130BH

Product Image

L488BHSC - L488 Bulb holder BA15S single contact

From £8.95 (£10.74 inc. VAT @ 20%)

Single contact bulb holder for Lucas L488 lamps

Comparable to other manufacturer part numbers - L488BHSC

Product Image

L488BHTW - L488 Bulb holder twin contact BAY15D offset pins

From £9.20 (£11.04 inc. VAT @ 20%)

Twin contact bulb holder BAY15D (offset pins) for Lucas L488 lamps

Comparable to other manufacturer part numbers - L488BHTW

Product Image

572783 - Bulb holder for L489 lamps - BA9S single contact

From £12.48 (£14.98 inc. VAT @ 20%)

Bulb holder for Lucas L489 type side lamps - MCC/BA9S bulb holder fitting, single contact.

Product Image

L539BASE - Bulb holder for L539 lamps SCC/BA15S single contact

From £16.95 (£20.34 inc. VAT @ 20%)

Twin wired base plate with 1156/SCC/BA15S single contact bulb holder with foam gasket for Lucas type L539 lamps.

Product Image

L594BHSC - L594 Bulb holder BA15S single contact

From £8.90 (£10.68 inc. VAT @ 20%)

Bulb holder BA15S single contact for Lucas L594 lamps

Comparable to other manufacturer part numbers - L594BHSC

Product Image

L594BHTC - L594 Bulb holder twin contact BAY15D offset pins

From £9.20 (£11.04 inc. VAT @ 20%)

Twin contact BAY15D bulb holder (offset pins) for Lucas L594 lamps. For stop and tail or front clear side and indicator.

Comparable to other manufacturer part numbers - L594BHTC

Product Image

1156LED - 1156 or BA15S Bulb holder base male socket with 2 wires

From £3.95 (£4.74 inc. VAT @ 20%)

This BA15S male socket connector, fitted with two 10cm wire tails, allows you to create a DIY wiring connection between your conventional bulb holder socket and LED clusters.

Product Image

1157LED - 1157 or BAY15D Bulb holder base male socket with 3 wires

From £4.45 (£5.34 inc. VAT @ 20%)

This BAY15D male socket connector, fitted with three 10cm wire tails, allows you to create a DIY wiring connection between your conventional bulb holder socket and LED clusters.

Product Image

253 - Double ended bulbholder

From £4.95 (£5.94 inc. VAT @ 20%)

double ended holder which accepts a plug or standard SBC bulb at either end. threaded outside body. offered in single or double contact

Product Image

253S - Double ended bulbholder - Double ended bulb holder - Single contact

From £13.45 (£16.14 inc. VAT @ 20%)

double ended holder which accepts a plug or standard SBC bulb at either end. threaded outside body. offered in single or double contact

Single contact holder which accepts a plug or standard...

Product Image

253D - Double ended bulbholder - Double ended bulb holder - Double contact

From £13.45 (£16.14 inc. VAT @ 20%)

double ended holder which accepts a plug or standard SBC bulb at either end. threaded outside body. offered in single or double contact

Double contact holder which accepts a plug or standard...

Product Image

253-INSERT - Double ended bulbholder - Bulb holder double ended insert BA15D

From £4.95 (£5.94 inc. VAT @ 20%)

double ended holder which accepts a plug or standard SBC bulb at either end. threaded outside body. offered in single or double contact

Double contact, double ended SBC/BA15D bulb holder insert....

Product Image

254 - Bulb holder plug BA15

From £8.41 (£10.09 inc. VAT @ 20%)

Plug for SCC/SBC type bulb holders. Offered in double contact or single contact.
Cables enter through back.

Product Image

254S - Bulb holder plug BA15 - Bulb holder plug - single contact BA15S

From £8.41 (£10.09 inc. VAT @ 20%)

Plug for SCC/SBC type bulb holders. Offered in double contact or single contact.
Cables enter through back.

Plug for SBC type holder, single contact, cables enter through back.

Product Image

254D - Bulb holder plug BA15 - Bulb holder plug - double contact BA15D

From £8.41 (£10.09 inc. VAT @ 20%)

Plug for SCC/SBC type bulb holders. Offered in double contact or single contact.
Cables enter through back.

Plug for SBC type holder, double contact, cables enter through back.

Product Image

254D-sol - Bulb holder plug SBC/BA15D

From £8.47 (£10.16 inc. VAT @ 20%)

Double contact bulb holder plug with solder connections - two part assembly (unscrews). To wire up, unscrew the body, push the brass connectors from the bakelite body, pass wires through the...

Product Image

254D-sol-N - Bulb holder plug SBC/BA15D - Nickel

From £8.47 (£10.16 inc. VAT @ 20%)

Double contact bulb holder plug with solder connections - two part assembly (unscrews). To wire up, unscrew the body, push the brass connectors from the bakelite body, pass wires through the...

Product Image

254D-sol-B - Bulb holder plug SBC/BA15D - Brass

From £8.47 (£10.16 inc. VAT @ 20%)

Double contact bulb holder plug with solder connections - two part assembly (unscrews). To wire up, unscrew the body, push the brass connectors from the bakelite body, pass wires through the...