Please Specify Rear mounting (Pull), or Front mounting (Blow)
when ordering

** Performance - At 0.15” ( 3.75mm) static pressure is the equivalent of a typical 1.5” (39mm) thick radiator.
Free air figures are always much greater and look more impressive but are not often relevant and therefore not shown here. Performance figures, intended as a guide, are shown for pulling mode, the most reliable. Blowing performance is unreliable, as it has degrees of spill and wastage and is only used when space is tight. ‘0’ Amp draw is taken at nominal 12V rating. Normal test voltage is 13.5V
| Nominal Size | amps @ 13.6 volts | Cubic Feet/Minute ** | Cubic Metres/Hour ** |
| 9" | 6 amps | 858 | 1458 |
| 10" | 7.2 amps | 902 | 1553 |
| 11" | 7.4 amps | 1180 | 2005 |
| 12" | 11 amps | 1311 | 2228 |
| 13" | 12 amps | 1390 | 2362 |
| 14" | 12 amps | 1530 | 2515 |
| 16" | 13 amps | 1709 | 2732 |
| 9" | 9 amps | 908 | 1543 |
| 10" | 9 amps | 1090 | 1852 |
| 11" | 10 amps | 1242 | 2110 |
| 12" | 12 amps | 1640 | 2834 |
| 13" | 12 amps | 1980 | 3364 |
| 14" | 12.3 amps | 2139 | 3634 |
| 16" | 14 amps | 2354 | 3999 |